- Stock: In Stock
- Model: UT18D UNI-T
UT18D Voltage and
Continuity Tester 12V-690V
UT18 series are designed for testing AC/DC voltage, 3-phase
voltage, phase sequence, continuity, and more. This series is categorized as
CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools
for electricians to quickly measure voltage levels in all environments. This
series should NOT be used with 110V electrical systems.
Features:
1. Auto power off, the conductor to be measured is greater
than 12V
2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication
Specifications | Range | UT18D |
Voltage (V) | 6V | 5V±1V |
12V | 8V±1V | |
24V | 18V±2V | |
50V | 38V±4V | |
120V | 94V±8V | |
230V | 180V±14V | |
400V | 325V±15V | |
690V | 562V±24V | |
Phase rotation test | 57Vac～400Vac (3 phase) | √ |
Frequency: 50Hz~400Hz | ||
Single lead (L2) | Operating voltage: 100V~690V | √ |
Frequency: 50Hz~400Hz | ||
Continuity test | Resistance: 0Ω~100kΩ (+50% accuracy) | √ |
Beeper and LED light indication | ||
RCD test | Operating voltage: 230V (50Hz~400Hz) | √ |
Polarity detection | Positive & Negative | √ |
Self-inspection | All LED or LCD | √ |
Features | ||
Voltage indication | | LCD |
Exceed voltage | Voltage range: 713V~788V | √ |
Auto standby | Standby current＜10μA | √ |
Slient mode | All range | √ |
Work light | | √ |
Low battery indication | Around 2.5V | √ |
LCD backlight | | √ |
LCD display (voltage) | 6V~690V | ±(1.5%+5) |
LCD display (Frequency) | 40Hz~400Hz | ±(3%+5) |
IP65 | | √ |
General Characteristics | ||
Power | 1.5V battery (R03)×2 | |
Display | 73.5mm x 35.5mm | |
Product color | Red and grey | |
Product net weight | 280g | |
Product size (W x H x D) | 272mm x 85mm x 31mm | |
Standard accessories | Batteries | |
Standard individual packing | Blister, English manual | |